Over the next week the plant's problems surfaced in other places: a crane that drifted when unloaded, a cutting head that fluttered at high speed, an auxiliary pump that sang at an odd pitch under heavy load. Each failure seemed small. Each nudged the same truth forward: the control architecture had been stretched thin by increased production quotas and newer, more aggressive tooling. The pressure compensators were pinned; the accumulators were undersized for the new cycle times. Systems designed for predictable loads now faced volatile demand.

It began on a rain-thinned Tuesday when the plant’s main press hiccuped during a midnight run. A microsecond of delay, they later called it — but that microsecond left a seam in an aluminum chassis that would have passed inspection in any lesser factory. The line stopped. Production managers came and went in clipped suits, eyes flashing between inventory sheets and the irritable red light on the press console.

"Because," he said, "it tells you what the machine will do when everything else is lying to you."

News of the pilot’s success spread through the plant like oil finding metal. Requests came not for band-aid fixes but for durable changes that respected dynamics and time constants. Peter’s small notes from Rohner’s book became templates. In the control room, a whiteboard that had long been used for shift trivia filled up with transfer functions and margin checks. Operators learned the feel of servo valves again, the way a press should breathe.

But Peter knew the hesitation had not come from the sensor alone. It was a symptom — a conversation between components, an argument between old design and new demands. He went home at dawn with the manual in his jacket.

On a Sunday, while the plant hushed under dim emergency lights, a new problem arrived: the gantry motors stuttered during a rapid traverse, then recovered. Peter rode the console into the machine room and watched the scrawled plots of velocity and pressure paint a story. The integral term of a control loop was saturating and then windup was producing overshoot. He found a bypass in the feedback path: a retrofit meant to save cost had bypassed the compensator’s damping network. The machine’s response had been given a faster tempo but no dancer to hold it together.

He climbed the ladder to the control manifold and found the actuator’s position sensor sliding just a hair off its mark. Tiny misalignments were a specialty of his: a millimeter here, a grain of grit there, a loss of authority on a system that ran on hydraulic instinct. He shut down, bled the loop, and with a gloved hand adjusted the sensor mount. The press hummed back to life, and for a few hours the plant’s heartbeat returned to normal.